Konica-Minolta bizhub 3602P
Service Mode. Diagnostics menu. Event Log
Display Log
This setting displays the panel text that appears when the event occurs.
Enter the Diagnostics menu, and then navigate to:
Event Log >Display Log
Press [OK] to navigate through the settings.
Print Log
This setting lists an extended version of the various printer events.
- Enter the Diagnostics menu, and then navigate to:
Event Log >Print Log
Press [OK] to navigate through the settings. - Select a log that you want to create, and then press [OK].
Note: The events that appear in the report vary depending on the operational history of the printer.
Print Log Summary
This setting lists a brief summary of the various printer events.
- Enter the Diagnostics menu, and then navigate to:
Event Log >Print Log Summary
Press [OK] to navigate through the settings. - Select a log that you want to create, and then press [OK].
Note: The events that appear in the report vary depending on the operational history of the printer
Mark Log
This setting allows you to create a service, maintenance, or custom log entry. Each log entry is added in the printer event log.
- Enter the Diagnostics menu, and then navigate to:
Event Log >Mark Log
Press [OK] to navigate through the settings. - Select a log that you want to create, and then press [OK].
Input tray quick print
This setting lets you print a single or continuous Quick Test page in either duplex or simplex mode.
Press [OK] to navigate through the settings.
- Enter the Diagnostics menu, and then select Input tray quick print.
- Select where you want to print the pages from.
- Select whether to print a single or continuous test page, and then press [OK].
Output bin quick feed
This setting allows you to send a single or continuous test page to a bin.
Press [OK] to navigate through the settings.
- Enter the Diagnostics menu, and then select Output bin quick feed.
- Select where you want to send the test page.
- Select whether to send a single or continuous test page, and then press [OK].