-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Konica-Minolta bizhub 360
Troubleshooting. Jam code list 5
Classification |
Jam code |
Cause |
Resulting operation |
Correction |
DF |
J-6108 |
During operation |
When feeding the third original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn OFF within a specified period of time after the PS6 turns ON. |
The DF stops immediately. If there is paper being trans- ferred or having been trans- ferred, the main body completes the paper exit before stopping operations. |
Open the open/close cover and remove jammed paper if any. |
J-6201 |
While in the single sided mode, the original registration sensor (PS9) does not turn ON within a specified period of time after the feed motor (M1) turns ON. |
J-6202 |
When feeding the first original in the mode other than the single sided mode, the original registration feed sensor (PS9) does not turn ON within a specified period of time after the feed motor (M1) turns ON. |
J-6203 |
When feeding the second original in the mode other than the single sided mode, the original registration sensor (PS9) does not turn ON within a spec- ified period of time after the feed motor (M1) turns ON. |
J-6204 |
When feeding the third original in the mode other than the single sided mode, the original registration sensor (PS9) does not turn ON within a spec- ified period of time after the feed motor (M1) turns ON. |
J-6205 |
While in the single sided mode, the original registration sensor (PS9) does not turn OFF within a specified period of time after the PS9 turns ON. |
J-6206 |
When feeding the first original in the mode other than the single sided mode, the original registration sensor (PS9) does not turn OFF within a specified period of time after the PS9 turns ON. |
J-6207 |
When feeding the second original in the mode other than the single sided mode, the original registration sensor (PS9) does not turn OFF within a specified period of time after the PS9 turns ON. |