-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Konica-Minolta bizhub 360
Troubleshooting. Jam code list 4
| Classification |
Jam code |
Cause |
Resulting operation |
Correction |
| DF |
J-6001 |
During operation |
The DF open/close switch (SW3) turns OFF while in the DF operation. |
The DF stops immediately. If there is paper being trans- ferred or having been trans- ferred, the main body completes the paper exit before stopping operations. |
Open the open/close cover and remove jammed paper if any. |
| J-6002 |
The cover open/close sensor (PS7) turns OFF while in the DF operation. |
| J-6101 |
While in the single sided mode, the original feed sensor (PS6) does not turn ON within a specified period of time after the original feed motor (M1) turns ON. |
| J-6102 |
When feeding the first original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn ON within a specified period of time after the original feed motor (M1) turns ON. |
| J-6103 |
When feeding the second original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn ON within a specified period of time after the original feed motor (M1) turns ON. |
| J-6104 |
When feeding the third original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn ON within a specified period of time after the original feed motor (M1) turns ON. |
| J-6105 |
While in the single sided mode, the original feed sensor (PS6) does not turn OFF within a specified period of time after the PS6 turns ON. |
| J-6106 |
When feeding the first original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn OFF within a specified period of time after the PS6 turns ON. |
| J-6107 |
When feeding the second original in the mode other than the single sided mode, the original feed sensor (PS6) does not turn OFF within a specified period of time after the PS6 turns ON. |