PrintCopy.info service

Konica-Minolta bizhub 360

Troubleshooting. Jam code list 2

Classification Jam code Cause Resulting operation Correction
PC-402 J-1306 During operation The paper feed sensor (PS1) does not turn OFF within a specified period of time after the PS1 turns ON. If there is a sheet of paper being printed when a jam occurs, the main body completes the paper exit before stopping operations. Open the right door of PC and the vertical conveyance door of the main body and remove jammed paper if any. Pull out the tray and remove jammed paper if any.
J-1307 The vertical conveyance sensor (PS2) does not turn ON within a specified period of time after the paper feed sensor (PS1) turns ON.
J-1308 The paper feed sensor (PS2) does not turn OFF within a specified period of time after the PS2 turns ON.
J-1309 When a paper feed start signal is sent out to PC-402 from the main body, a recieve signal from PC-402 is not sent out within a specified period of time after that.
J-1311 The shift position sensor (PS11) does not turn ON within a specified period of time after shift home sensor (PS12) turns OFF.
PC-202 J-1400 The vertical conveyance sensor /4 (PS126) does not turn ON within a specified period of time after the paper feed motor /4 (M123) turns ON.
J-1401 The vertical conveyance sensor /3 (PS117) does not turn ON within a specified period of time after the verti- cal conveyance sensor /4 (PS126) turns ON.
LU J-1500 The LU exit sensor (PS155) does not turn ON within a specified period of time after the feed clutch (CL151) turns ON. Open the upper door of LU and the vertical conveyance door of the main body and remove jammed paper if any.
J-1501 The vertical conveyance sensor (PS2) of the main body does not turn ON within a specified period of time after the LU exit sensor (PS155) turns ON.
Other J-2001 Emergency stop jam of the system The main body and the optional device stop immediately. Remove jammed paper if any from optional device / main body.
J-2002 While in the print, the vertical convey- ance door opens.
J-2003 The ADU door is opened while in printing.
J-2004 The ADU is opened while in printing.
PC J-2005 While in the print, the right door opens.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us