Konica-Minolta bizhub 360
Troubleshooting. Jam code list 1
Classification | Jam code | Cause | Resulting operation | Correction | |
---|---|---|---|---|---|
Bypass | J-1000 | During operation | The vertical conveyance sensor (PS2) does not turn ON within a specified period of time after the feed clutch /BP (CL6) turns ON. |
If there is a sheet of paper being printed when a jam occurs, the main body completes the paper exit before stopping operations. | Pull out the paper from the bypass tray and remove jammed paper if any. |
Tray 1 | J-1100 | The registration sensor (PS1) does not turn ON within a specified period of time after the feed clutch /1 (CL4) turns ON. | Open the vertical con- veyance door and ADU and remove jammed paper if any. Pull out the tray and remove jammed paper if any. |
||
Tray 2 | J-1200 | The vertical conveyance sensor (PS2) does not turn ON within a specified period of time after the feed clutch /2 (CL5) turns ON. | |||
J-1201 | The registration sensor (PS1) does not turn ON within a specified period of time after the vertical conveyance sensor (PS2) turns ON. | ||||
PC-202 | J-1300 | The vertical conveyance sensor /3 (PS117) does not turn ON a specified period of time after the paper feed motor /3 (M122) turns ON. | Open the right door of PC and the vertical conveyance door of the main body and remove jammed paper if any. Pull out the tray and remove jammed paper if any. | ||
PC-402 | The vertical conveyance sensor (PS2) does not turn ON a specified period of time after the paper feed motor (M1) turns ON. | ||||
PC-202 | J-1301 | The vertical conveyance sensor (PS2) of the main body does not turn ON within a specified period of time after the vertical conveyance sensor /3 (PS117) of PC-202 turns ON. | |||
PC-402 | J-1302 | The vertical conveyance sensor (PS2) of the main body does not turn ON within a specified period of time after the vertical conveyance sensor (PS2) of PC-402 turns ON. | |||
J-1305 | The paper feed sensor (PS1) does not turn ON within a specified period of time after the paper feed motor (M1) turns ON. |