Konica-Minolta bizhub 3320

Feed Tests

This test verifies that media can be fed to a specific output bin. No information is printed on the media.
To run this test:

1. From the Diagnostics menu, navigate to:
   Output Bin Tests >Feed Tests
2. Select the output bin into which you want the paper to exit. All installed output bins appear.
3. Select one of the following:
   - Single—Feeds a single page.
   - Continuous—Continuously feeds pages until ✖ is pressed.

Sensor Test

This test verifies that the output bin sensors are working correctly.
To run this test:

1. From the Diagnostics menu, navigate to:
   Output Bin Tests > Sensor Test > Standard Bin
   Testing... appears while the printer is verifying the state of the sensor.
   The control panel displays the current state of the sensor.
2. Manually actuate the sensor to make it toggle between empty and full. If the sensor does not toggle, then the sensor is malfunctioning.
3. Press ✖ to exit the test.