Konica-Minolta bizhub 308e
Troubleshooting. IQ. Uneven density 2
Troubleshooting procedure
Step | Section | Check item | Result | Action |
---|---|---|---|---|
1 | Paper Setting | The paper to be used for printing does not match the paper type and size of paper setting selected on the machine. | YES | Make the paper setting again on the machine. |
2 | IDC sensor | IDC sensor is dirty. | YES | Clean. |
3 | Service Mode -> Stabilizer | Select [Service Mode] -> [Imaging Process Adjustment] - > [Stabilizer] -> [Stabilization Only] and the image trouble is eliminated. |
NO | Go to the next step. |
4 | Service Mode -> Gradation Adjust | Select [Service Mode] -> [Imaging Process Adjustment] - > [Gradation Adjust] and the image trouble is eliminated. |
NO | Go to the next step. |
5 | Image check |
|
YES | Go to the next step. |
6 | Write section | Dirt or foreign matter on the dust-proof glass of the PH. | YES | Clean the PH window. |
7 | Charging section | Foreign matter on charging roller. | YES | Lightly wipe the surface clean of foreign matter using hydro-wipe (65AA-99##). Note: Do not apply a strong force to the surface of the charging roller. As doing so can damage the surface. |
8 | Photoconductor section | Dirt, scratches, or foreign matter on the photoconductor. | YES |
|
9 | Photoconductor section | Photoconductor drives faultily. | YES |
|
10 | 1st transfer section | Scratches or dirt on 1st transfer roller. | YES |
|
11 | Developing section | Toner bristles not even on the developing roller, resulting in a line or band. | YES | Replace the developing unit. |
12 | Paper path | There is dirty or foreign matter on paper path. | YES | Check and clean the paper path including the duplex section. |
13 | Transfer belt unit | Dirt, scratches, or foreign matter on the transfer belt. | YES |
|
14 | Transfer belt unit | There is a positive contact between the transfer belt application terminals and the high voltage unit connection terminals (T1-1). | NO | Clean or correct the terminal. |
15 | Transfer belt unit | Transfer belt rotates faultily. | YES |
|
16 | 2nd transfer section | Dirt or foreign matter on the 2nd transfer roller. | YES |
|
17 | 2nd transfer section | Faulty pressure/retraction operation of the 2nd transfer roller. | YES |
|
18 | 2nd transfer section | There is a positive contact between the application terminals of the 2nd transfer and the connection terminals (T2, E1) and ground terminal of the high voltage unit. | NO | Clean or correct the terminal. |
19 | Fusing unit | There is dirty or foreign matter on paper path of fusing unit. | YES | Clean. (Disassembling the fusing unit is prohibited.) |
20 | Service Mode -> Initialize + Image Stabilization |
Select [Service Mode] -> [Imaging Process Adjustment] - > [Stabilizer] -> [Initialize + Image Stabilization] and [Gradation Adjust], and the image trouble is eliminated. |
YES | Readjust. |
NO |
|