Konica-Minolta bizhub 308e

Rewriting of Firmware

• There are two ways to update the firmware: One is by directly connecting with the main body using the USB memory device, and the other is by downloading over a network.

NOTE 1
▪ The settings in the "Utility" mode and the "Service Mode" will not be changed, when the firmware is updated.
▪ Install the various data such as voice data, or loadable device driver as required in the order shown below in accordance with the rewriting firmware or user's environment.

Rewriting firmware or user's environment.

1. Install the various data.
   [Service Mode] -> [System 2] -> [Install Data]
2. Install the loadable device driver.
   [Service Mode] -> [System 2] -> [Driver Install]
3. Turn OFF and ON the main power switch.

Confirming the firmware version

Procedure

1. Call the Service Mode to the screen.
2. Select the [Firmware Version].
3. Check the firmware version.
   NOTE
   ▪ After conducting firmware updating, check the firmware version No. and confirm that the firmware has been normally updated.