Konica-Minolta bizhub 28e
Service Mode. Field service program modes
The fax machine feature maintenance modes for machine adjustment. Each mode is listed below along with the command used to activate the mode and a brief functional description.
Press <Mode> about two seconds until you hear the beep twice. When you press “ * ”, you will hear short beeps. However continue the operation, as there is no problem.
| Service Program | Explanation | Operation |
|---|---|---|
| Machine parameters | Used to set or clear machine parameters. | <Mode>, <*>, <0>, <0> |
| Memory switch | Used to set or clear memory switches | <Mode>, <*>, <0>, <1> |
| User data clear | This mode clears user programmed information. | <Mode>, <*>, <0>, <2> |
| All RAM clear | This mode clears all backup data to initialize the machine. | <Mode>, <*>, <0>, <3> |
| Unique switches | These switches are used to program internal machine parameters. | <Mode>, <*>, <0>, <4> |
| T30 Monitor | The communications on the journal list are able to print. | <Mode>, <*>, <0>, <5> |
| Printer maintenance mode | Shows the error code for "Checkout error" errors. | <Mode>, <*>, <0>, <6> |
| Service report printing | You can print out a report that contains ma- chine’s usage and error history. | <Mode>, <*>, <0>, <7> |
| Monitor speaker | If you need to monitor the signal of fax communi- cation, turn this mode on. | <Mode>, <*>, <0>, <8> |
| Test Modes | This mode offers the ability to print a test pattern and monitor certain unit output functions. | <Mode>, <*>, <0>, <9> |
| Print parameter set- tings | This function instructs the unit to print a list of the machine parameter, memory switch and unique switch settings. | <Mode>, <*>, <1>, <0> |
| Factory functions | This function provides several machine test. | <Mode>, <*>, <1>, <1> |
| Line tests | This mode offers several internal tests and ability to monitor certain unit output functions.
|
<Mode>, <*>, <1>, <2> |
| Mirror carriage transfer mode | This mode moves the mirror carriage to the transport position. | <Mode>, <*>, <1>, <4> |
| Consumable order sheet | Used to set or clear the consumable order sheet. | <Mode>, <*>, <1>, <5> |
| DRAM clear | This clears the image storage memory. | <Mode>, <*>, <1>, <6> |
| Life monitor mainte- nance | Use this mode to clear the resettable counter or reenter the life monitor. | <Mode>, <*>, <2>, <0> |
| Sensor input test | This mode enables to confirm the sensor status. | <Mode>, <*>, <2>, <2> |
| Printer diagnostic mode | This mode enables to confirm the operation of the printer parts. | <Mode>, <*>, <2>, <3> |
| Network service mode | Used to clear administrator's password and ini- tialize authentication method. | <Mode>, <*>, <2>, <4> |
| Flash ROM sum check | This mode enables to check Sum after the Flash ROM version is updated. | <Mode>, <*>, <2>, <9> |
| Set service report | Used to enter location where to send the service report. | <Mode>, <*>, <4>, <2> |
| Printer registration ad- justment | This mode adjusts the print position. | <Mode>, <*>, <4>, <3> |
| Reset printer trouble | This mode clears the service call. Clear the warn- ing when the trouble is settled. | <Mode>, <*>, <4>, <5> |
| Cleaning mode | This mode rotate the Pickup roller and registra- tion roller automatically so that you can clean the surface of them. | <Mode>, <*>, <4>, <6> |
| Network switch mode | Adjust the network parameter. | <Mode>, <*>, <5>, <1> |
| Coverage measure- ment | You can scan and check the black ratio of a document. | <Mode>, <*>, <5>, <4> |
| Touch panel adjust- ment | Correct the X, Y on the touch panel. | <Mode>, <*>, <5>, <6> |
| Printer control param- eter mode | Adjust functions of print controller. | <Mode>, <*>, <5>, <7> |
| Network capture | You can capture the packet data the machine has sent and received. | <Mode>, <*>, <5>, <8> |
| Storage maintenance | This mode is used to erase data the SD memory card on the main control board. | <Mode>, <*>, <5>, <9> |
| Initialize protection | Use this function to initialize protect passcode and administrator’s password. | <Mode>, <*>, <6>, <1> |
| Color fine adjustments | Adjust the scan color. You can adjust RGB mode for front side of document, and make fine difference for back side of document. | <Mode>, <*>, <6>, <2> |
| AS400 batch settings | All AS400 related settings will turn on using this function. | <Mode>, <*>, <6>, <3> |
| Certification terminal | Enable this setting to use the certification termi- nal. | <Mode>, <*>, <6>, <5> |
| Service function menu | All the field service program modes are available from the menu. | <Mode>, <*>, <7>, <7> |
| Counter information maintenance | The machine has the counter data saved on both the EEPROM and SD card with its serial number connected. If for some reasons these two serial numbers do not match, maintenance the data manually. | <Mode>, <*>, <9>, <3> |
| RDS data copy | This mode enables you to import and export binary data including machine settings. | <Mode>, <*>, <9>, <4> |
| Asset number | This mode is used to input the asset number. | <Mode>, <*>, <9>, <5> |
| Update the firmware | Update main ROM, optional print controller ROM and network board ROM using this mode. | <Mode>, <*>, <9>, <8> |
| Quick Initial settings | You can do the following setting with continu- ously:
|
<Mode>, <*>, <9>, <9> |