Konica-Minolta bizhub 28e
Maintenance schedule
Scanning Section
| Parts Name | Maintenance Cycle (pages) | |
|---|---|---|
| Clean | Replace | |
| Covers | Wipe it with a soft cloth dampened with water. If that does not clean the part, wipe it first with a soft cloth dampened with natural detergent, then wipe it with a soft cloth dampened with water. |
— |
| Touch panel display | — | |
| ADF document pad | — | |
| Document pad | — | |
| ADF glass | Wipe it with a soft cloth dampened with water. | — |
| Document glass | — | |
| Assy Piece Separator *2 | Wipe it with a soft cloth dampened with alcohol. | 60,000 sheets/Letter or 2 years |
| Roller Separate *2 | 60,000 sheets/Letter or 2 years |
|
| Roller Pickup *2 | 60,000 sheets/Letter or 2 years |
|
| Roller Feed / Roller Press | — | |
| Roller Exit / Roller Press | — | |
| CIS | Wipe it with a dry soft cloth. | — |
*1 Replace these parts at the same time.
Printer Section
| Parts Name | Maintenance Cycle (pages) | |
|---|---|---|
| Clean | Replace | |
| Print head | Wipe it with a soft cloth dampened with alcohol. | — |
| Roller Pickup *2 | 100,000 sheets/Letter or 2 years |
|
| Pad Pressure CST *2 | 100,000 sheets/Letter or 2 years |
|
| Roller Feed OP | 100,000 sheets/Letter | |
| Roller Duplex | 300,000 sheets/Letter | |
| Roller Pickup MP | 100,000 sheets/Letter or 2 years |
|
| Pad Pressure MP | 100,000 sheets/Letter or 2 years |
|
| Roller Resist | 100,000 sheets/Letter | |
| Roller Exit Decarl / Roller Sponge Decarl |
100,000 sheets/Letter | |
| Inter roller | — | |
| 2-bin roller | — | 300,000 sheets/Letter |
| Fuser | — | 100,000 sheets/Letter |
| Roller Transfer | — | 100,000 sheets/Letter |
| Guide Transfer | — | 100,000 sheets/Letter |
| Filter Ozone | — | 150,000 sheets/Letter |
*2 Replace these parts at the same time.
Note
The maintenance cycle (pages or years) may be shorter than the above value according to the environment or usage of the machine, and the documents and paper that are used. The maintenance cycle (pages or years) are not insured and early replacement of the parts may be needed to maintain the machine quality.