Konica-Minolta bizhub 287

System preparation

• PC with USB ports
• USB memory
  NOTE
  • Possible to be non-operational products.
  • USB flash memory compatible with the USB (1.1/2.0/3.0) interface
  The speed is limited to USB2.0 specifications even if using a device that supports USB3.0.
  • The USB memory is formatted in FAT32 format.
  • No security functions such as encryption and password lock have been added (or the USB memory allows its security functions to be turned OFF).
  • A USB memory that is recognized by the computer as two or more drives cannot be used.
  • We recommend that you use a memory device with no more than 32 GB of capacity.

USB memory used to update firmware

1. Uncompress the firmware file.
2. Connect the USB to the PC, and copy the extracted data [FW0001] to the root directory of the USB memory.

NOTE

• More than one firmware data with a single model can be stored in the USB memory.
• In this case, copy the firmware data to the USB memory according to the following procedures.
  1. Make the folder named "FWSelect" (case-sensitive) to the root directory of the USB memory.
  2. Make a folder with any folder name (one byte alphameric characters, maximum 40 characters) under "FWSelect" folder, and store the firmware data to the folder.