Konica-Minolta bizhub 284e

Rewriting of Firmware

• There are two ways to update the firmware: One is by directly connecting with the main body using the USB memory device, and the other is by downloading over a network using the Internet ISW.

NOTE 1
• The settings in the "Utility" mode and the "Service Mode" will not be changed, when the firmware is updated.
• Activate the loadable device driver and voice data as required in accordance with the rewriting firmware or user's environment.

Rewriting firmware or user's environment.

1. [Service Mode] -> [System 2] -> [Install Data]
2. Turn OFF and ON the main power switch and sub-power switch.
3. Upgrade the printer driver version.

Confirming the firmware version

Procedure

1. Call the Service Mode to the screen.
2. Select the [Firmware Version].
3. Check the firmware version.
   NOTE
   ▪ After conducting firmware updating, check the firmware version No. and confirm that the firmware has been normally updated.