Konica-Minolta bizhub 282
Service Mode. Function tree 2
• The function tree is shown to comply with the format displayed on the screen.
| Tech. Rep. Mode | ||
|---|---|---|
| Function | F1 | |
| F2 | ||
| F7-1 | ||
| F7-2 | ||
| F8 | ||
| F12 | ||
| Hard Disk Format | ||
| FD | ||
| FC | ||
| Org. Width Detect Adjust | ||
| Download Firmware | ||
| I/O Check | Printer | Bypass/Duplex |
| Tray 1 | ||
| Tray 2 | ||
| Tray 3 | ||
| Tray 4 | ||
| Toner/Side Cover | ||
| Drive Motor Detect | ||
| LCT | ||
| Engine | ||
| Scanner | ||
| Job Tray | ||
| Sheet-through-ADF (2-sided) | ||
| Finisher | ||
| Operation Check | ADF | Paper Passage |
| ADF Sensor Adjust | ||
| Backup Data Initialization | ||
| Exp. Lamp Check | ||
| Scanner | ||
| CS Remote Care *2 | ||
| ROM Version | ||
| Level History | ||
| FAX Set *1 *2 | ||
| Soft Switch Settings *1 *2 | ||
*1: For more details, see FK-503 Service Manual.
*2: If enhance security mode is set ON, menu is not shown.