Konica-Minolta bizhub 282
Service Mode 01. How to Enter
NOTE
• Ensure appropriate security for Service mode function setting procedures. They should NEVER be shown to any unauthorized person not involved with service jobs.
Procedure
- Press the Utility/Counter key.
- Touch [Check Detail].
- Press the following keys in this order.
Stop → 0 → 0 → Stop → 0 → 1 - Enter the 8-digit service code and touch [END]. (Default value: 00000000)
NOTE
• When [END] is touched after a wrong service code has been entered, the Basic screen reappears.
• At the fourth access after entries of three wrong access codes, [END] is not available on the screen. It is therefore necessary to turn OFF and ON the Main Power Switch.
• If you forget the service code, it becomes necessary to replace the RAMS Board with a new one. Take necessary steps not to forget the service code.
• The RAMS Board is not available as a replacement part. If it requires replacement, contact Office Printing Support Division by way of CSES. - The Tech. Rep. Mode menu will appear.
Exiting
• Touch the [Exit] key.
Changing the Setting Value in Service Mode Functions
- Use the +/- key to enter or change the setting value.
- Use the 10-Key Pad to enter the setting value. (To change the setting value, first press the Clear key before making an entry.)