Konica-Minolta bizhub 25
Service Mode. Printer diagnostic mode
This mode can confirm the operation of each parts of the printer section.
- Press <Setting>, <*>, <2>, <3>.
- Select the device you want to set to ON.
Fan Full : Rotate the fan motor with full power
Rx Motor : Rotate the Rx motor
Dup Dir CW : Rotate the Duplex Motor clockwise (CW) or counterclockwise (CCW).
Mup Mtr : Rotate the duplex motor
Shift Mtr : This motor is not available on your machine.
Clutch 1 : Turn on clutch of cassette 1
Clutch 2 : Turn on clutch of cassette 2
Man Clutch : Rotate Bypass tray feed clutch
Reg Clutch : Turn on Register roller clutch
ALL OFF : Turn the all device to off - Press the key once again will turn the device off.
Press [All OFF] to turn all device off at once. - Press [Close] to exit.