Konica-Minolta bizhub 235

1 DRAM CLEAR

It will be displayed only when the optional FAX kit FK-510 is mounted.

• Clear all data in the memory file and free all memory to 100%, the user data are not effect.
• But only clear DRAM data on MFP board not include DRAM data on NIC and Flash ROM backup image data

NOTE
• Perform the main switch OFF/ON after Memory clear.
• Not include DRAM data on NIC board.

2 FLASH ROM CLEAR

• To return the settings of the following functions to their defaults by clearing their current settings.
• The items below are cleared (initialized).

NOTE
• Before performing [FLASH ROM CLEAR], record the setting values that are initialized by this operation.
• To record the setting values, it is helpful to create and print reports and lists.
• As the reports and lists do not include some setting values, be sure to record them separately.
• After performing [FLASH ROM CLEAR], re-entering data is required based on the recorded setting values.

3 MEMORY CLEAR

• To clear the setting values listed on the right, resetting them to the default values.
• The following items are initialized;
  UTILITY
  SERVICE MODE - SERVICE'S CHOICE
  SERVICE MODE - ADJUST
  SERVICE MODE -ADMINISTRATOR NUMBER REGISTRATION
  SERVICE MODE - FIXED ZOOM CHANGE
  SERVICE MODE - SECURITY
  Copy program registration.

NOTE
• After memory clear has been executed, be sure to turn OFF and ON the power switch.

Procedure

1. Select [MEMORY CLEAR], and press the OK key.
2. Select [YES], and press the OK key.

NOTE
• After MEMORY CLEAR has been executed, be sure to turn OFF and ON the power switch.

4 TOTAL CLEAR

• To clear the all electronic counters.
• The following counters are cleared;
  SIZE COUNTER
  PM COUNTER
  MAINTENANCE COUNTER
  SUPPLIES COUNTER
  APPLICATION COUNT.
  SCAN COUNTER
  PAPER SIZE COUNTER
  MISFEED COUNTER
  TROUBLE COUNTER

NOTE
• When turning OFF the power switch after clearing the data, make sure that the message "ACCEPTED" is displayed on the control panel.
• After memory clear has been executed, be sure to turn OFF and ON the power switch.

5 PM COUNTER

To clear each of the counts of the PM counter.
• BYPASS
• TRAY 1
• TRAY 2
• TRAY 3
• TRAY 4
• TRAY 5
• ADF FEED
• ADF REVERSE
• IR
• OZONE
• FUSING
• TRANSFER

NOTE
• When turning OFF the power switch after clearing the data, make sure that the message "ACCEPTED" is displayed on the control panel.
• After memory clear has been executed, be sure to turn OFF and ON the power switch.