Konica-Minolta bizhub 224e
Troubleshooting. Machine is not energized at all, Fusing heaters do not operate
Machine is not energized at all (DCPU operation check)
Relevant electrical parts
• Main power switch (SW1)
• Printer control board (PRCB)
• MFP board (MFPB)
• DC power supply (DCPU)
Procedure
Step | Check item | Location | Result | Action |
---|---|---|---|---|
1 | Is a power voltage supplied across CN001-1 and 2 on DCPU? | 19-T | NO | Check the WIRING from the wall outlet to SW1 to CN001. |
2 | Are the fuses on DCPU conducting? | NO | Replace DCPU. | |
3 | Is DC5 V being output from CN006-5 on DCPU? | 22-R | NO | Replace DCPU. |
4 | Is DC24 V being output to CN007-3 on DCPU? | 22-R | NO | • Check the WIRING from the wall MFPB to PRCB to DCPU. • Replace DCPU. • Replace MFPB. • Replace PRCB. |
5 | The LED on PRCB is blinking? | NO | Replace PRCB. | |
6 | Is DC24 V being output to CN007-1 on DCPU? | NO | Replace DCPU. |
Fusing heaters do not operate
Relevant electrical parts
• Main power switch (SW1)
• Right door switch (SW3)
• DC power supply (DCPU)
• Printer control board (PRCB)
• Fusing unit
Procedure
Step | Check item | Location | Result | Action |
---|---|---|---|---|
1 | Is the power source voltage applied across CN008-5 on DCPU? During this time, the right door should be closed. |
20-R | NO | Check wiring from power outlet to SW1 to CN008 to SW3. |
2 | Is the power source voltage applied across PRCB CN5-6, 9? | 26-E | YES | Replace the fusing unit. |
NO | Replace DCPU. Replace PRCB. |