Konica-Minolta bizhub 222

6 Special Parts Counter

Functions

• To display the number of times that each PM part is used. To clear the data for any counter.

Use

• When any maintenance part is replaced.
• PC Life: Is the ratio of the PC Drum rotation compared to PC Drum Life. Clear this counter when the PC Drum Unit or developer has been replaced.
• I/C Life: Displays the number of prints according to the length of the paper.
• Developer: Number of times that the Developing Unit is replaced. Automatically counts up when the PC Life counter is cleared.
• Bypass: Number of sheets of paper fed from the Manual Feed Tray.
• Tray 1: Number of sheets of paper fed from the Tray 1.
• Tray 2: Number of sheets of paper fed from the Tray 2.
• Tray 3: Number of sheets of paper fed from the Tray 3.
• Tray 4: Number of sheets of paper fed from the Tray 4.
• LCT Parts 1: Number of sheets of paper fed from the LCT.
• Other PM Parts 1: Number of sheets of paper fed.
• Other PM Parts 2: Number of sheets of paper fed.
• Other PM Parts 3: Number of sheets of paper fed.
• ADF Take-Up: Number of document pages fed through the take-up section of the ADF.
• ADF Reverse: Number of document pages fed through the turnover unit of the ADF
• IR 1: Number of IR scans.
• IR 2: Number of IR scans.
• Toner Pages:Number of pages equivalent to the number of black dots on A4 original with B/W 5%
• Fusing Unit: Number of pages fed out.

Setting/ Procedure

Checking the counter reading
Clearing the counter reading (all and a specific one)

7 Service Call Counter

Use

• To check the number of malfunctions that have occurred for each type of malfunction. To clear the data for the counter.

Setting/ Procedure

Checking the counter reading
Clearing the counter reading (all and a specific one)

8 Application Counter

Functions

• To display or clear the readings of application counters.

Use

• Copy: Number of copies made
• Printer: Number of printed pages produced via computer
• List Print: Number of printed pages of lists
• Fax Print: Number of printed pages received as fax and mail
• Fax Transmission: Number of pages of fax transmitted
• Mail Transmission: Number of pages transmitted by fax/scanner

Setting/ Procedure

Checking the counter reading
Clearing the counter reading (all and a specific one)

9 Maintenance Counter

Functions

• To set the counter value at which maintenance should be performed for any given part.

Use

<Maintenance Counter (Set)>

• Use the Keypad to type in the maintenance counter value.
• When the reading reaches a predetermined value, appears in the sub-message display area.

<Maintenance Counter (Count)>

• Counts up when a sheet of paper is fed through the copier.

Setting/ Procedure

Checking the counter reading
Clearing the counter reading (all and a specific one)