Konica-Minolta bizhub 222
Service Mode. Function tree 2
• The function tree is shown to comply with the format displayed on the screen.
Tech. Rep. Mode | ||
---|---|---|
Function | F1 | |
F2 | ||
F7-1 | ||
F7-2 | ||
F8 | ||
F12 | ||
Hard Disk Format | ||
FD | ||
FC | ||
Org. Width Detect Adjust | ||
Download Firmware | ||
I/O Check | Printer | Bypass/Duplex |
Tray 1 | ||
Tray 2 | ||
Tray 3 | ||
Tray 4 | ||
Toner/Side Cover | ||
Drive Motor Detect | ||
LCT | ||
Engine | ||
Scanner | ||
Job Tray | ||
Sheet-through-ADF (2-sided) | ||
Finisher | ||
Operation Check | ADF | Paper Passage |
ADF Sensor Adjust | ||
Backup Data Initialization | ||
Exp. Lamp Check | ||
Scanner | ||
CS Remote Care *2 | ||
ROM Version | ||
Level History | ||
FAX Set *1 *2 | ||
Soft Switch Settings *1 *2 |
*1: For more details, see FK-503 Service Manual.
*2: If enhance security mode is set ON, menu is not shown.