Konica-Minolta bizhub 222

NOTE
• Ensure appropriate security for Service mode function setting procedures. They should NEVER be shown to any unauthorized person not involved with service jobs.

Procedure

1. Press the Utility/Counter key.
2. Touch [Check Detail].
3. Press the following keys in this order.
   Stop → 0 → 0 → Stop → 0 → 1
4. Enter the 8-digit service code and touch [END]. (Default value: 00000000)
   NOTE
   • When [END] is touched after a wrong service code has been entered, the Basic screen reappears.
   • At the fourth access after entries of three wrong access codes, [END] is not available on the screen. It is therefore necessary to turn OFF and ON the Main Power Switch.
   • If you forget the service code, it becomes necessary to replace the RAMS Board with a new one. Take necessary steps not to forget the service code.
   • The RAMS Board is not available as a replacement part. If it requires replacement, contact Office Printing Support Division by way of CSES.
5. The Tech. Rep. Mode menu will appear.

Exiting

• Touch the [Exit] key.

Changing the Setting Value in Service Mode Functions

• Use the +/- key to enter or change the setting value.
• Use the 10-Key Pad to enter the setting value. (To change the setting value, first press the Clear key before making an entry.)