Konica-Minolta bizhub 215

TOTAL COUNTER

• To display the total count value of the selected mode.
  COPY: Total count value in copy mode
  COPY DUP.: Total count value in duplex copy mode
  PRINT: Total count value in PC print mode
  PRINT DUP.: Total count value in duplex PC print mode.
• To check total count value in each mode.
• Counting method is different depending on the settings of [SECURITY], [TOTAL COUNTER] in the service mode.

SIZE COUNTER

• To display the count of the size counter.
• Paper sizes on which counting can be made are different depending on the setting of [SECURITY] , [SIZE COUNTER] in the service mode.
• To clear the count, use [CLEAR DATA] of the SERVICE MODE.

PM COUNTER

• To display the count of the number of times each of different parts of the machine has been used.
• This function is used at the time of maintenance work for the main body and options.
• The count should be cleared when the corresponding PM part is replaced.

Procedure

BYPASS: Each time a page is printed with paper from the bypass tray, the counter increases by one.
TRAY1: Each time a page is printed with paper from the tray 1, the counter increases by one.
TRAY2: Each time a page is printed with paper from the tray 2, the counter increases by one.
TRAY3: Each time a page is printed with paper from the tray 3, the counter increases by one.
TRAY4: Each time a page is printed with paper from the tray 4, the counter increases by one.
TRAY5: Each time a page is printed with paper from the tray 5, the counter increases by one.
ADF FEED: Each time a page is printed with paper from the ADF feed, the counter increases by one.
ADF REVERSE: Each time a page is printed with paper from the ADF reverse, the counter increases by one.
IR: Each time a page is copied with the use of the scanner, the counter increases by one
OZONE: If the paper length in the sub scanning direction is 216 mm or less, each time a page is printed, the counter increases by one. If the paper length in the sub scanning direction is over 216 mm, each time a page is printed, the counter increases by two.
FUSING: If the paper length in the sub scanning direction is 216 mm or less, each time a page is printed, the counter increases by one. If the paper length in the sub scanning direction is over 216 mm, each time a page is printed, the counter increases by two.
TRANSFER: If the paper length in the sub scanning direction is 216 mm or less, each time a page is printed, the counter increases by one. If the paper length in the sub scanning direction is over 216 mm, each time a page is printed, the counter increases by two.
• To clear the count, use [CLEAR DATA] of the SERVICE MODE.