Konica-Minolta bizhub 210
Troubleshooting. Jam 5. Paper Exit Section Misfeed
Detection timing
Type | Description |
---|---|
Paper Exit Section misfeed detection | The Exit/Turnover Sensor (PC10-ADF) is not blocked even after the set period of time has elapsed after the Original Detection Sensor (PC8-ADF) is blocked by the paper. |
Detection of paper remaining in the Transport Section | The Exit/Turnover Sensor (PC10-ADF) is not unblocked even after the set period of time has elapsed after the Original Detection Sensor (PC8-ADF) is unblocked by the paper. |
Relevant electrical parts
Transport Motor (M2-ADF)
Original Detection Sensor (PC8-ADF)
Exit/Turnover Sensor (PC10-ADF)
Control Board (PBA-CONT)
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial checks | ||
2 | PC8-ADF sensor check | PBA-CONT CN6CONT-6 | G-2 |
3 | PC10-ADF sensor check | PBA-CONT CN6CONT-9 | H-2 |
4 | M2-ADF operation check | E-7 | |
5 | PBA-CONT replacement | E-5 |