Konica-Minolta bizhub 20

Periodical maintenance parts are the parts to be replaced periodically to maintain product quality. These parts would affect the product quality greatly if they lost their function even if they do not appear to be damaged or there is no change in their appearance.

The periodical maintenance parts listed below should be replaced at the service center referring to the service life.

Parts Name	LCD	Qty	Approximate Life *1 (number of prints)
Fuser Unit	REPLACE PARTS FUSER UNIT	1	100,000 pages
Laser Unit	REPLACE PARTS LASER UNIT	1	100,000 pages
PF kit for Tray 1 *3	REPLACE PARTS PF KIT1	1	100,000 pages
MP PF tray *2	REPLACE PARTS PF KIT MP	1	Except for China/ India: 50,000 pages
			China: 25,000 pages
			India: 12,000 pages

To reset the count of each periodical maintenance parts, refer to "Resetting the Periodical Maintenance Parts Life"

*1 At 5% print coverage (A4 or Letter size). The actual number of printed pages will vary depending on the print jobs and paper you use. The number is calculated when simplex printed the normal business document (ISO/IEC19752) on the A4 size.

*2 Paper feeding kit MP means the MP roller holder ASSY and the separation pad ASSY MP.

*3 Paper feeding kit for Tray 1 and Tray 2 means the roller holder ASSY, the separation pad ASSY and the separation pad spring. Tray 1 and Tray 2 are the same kit.

Note :

• Always turn off the power switch of the machine and unplug the power cord from the power outlet before replacing the periodical maintenance parts.
• If the Fuser Unit is replaced after errors related to the Fuser Unit occur, it is necessary to leave the machine power ON for 15 minutes after part replacement. This will make the machine to be released from errors.
• After disconnecting flat cables, check that each cable is not damaged at its end or shortcircuited.
• When connecting flat cables, do not insert them at an angle. After insertion, check that the cables are not at an angle.