Konica-Minolta bizhub 190f
Service Mode. List of service modes
The fax machine feature maintenance modes for machine adjustment. Each mode is listed below along with the command used to activate the mode and a brief functional description.
Note: When you press “ * ”, you will hear short beeps. However continue the operation, as it is no problem.
| Service Program | Explanation | Operation |
|---|---|---|
| Set or Clear Machine Parameters | Used to set or clear machine parameters. | <Menu>, <*>, <0>, <0> |
| Set or Clear Memory Switches | Used to set or clear memory switches. | <Menu>, <*>, <0>, <1> |
| All RAM Clear | Erases same information as “Clear Programmed Data / User Settings” function along with resetting all of the machine parameters, memory switches and unique switches to factory defaults. | <Menu>, <*>, <0>, <3> |
| Set or Clear Unique Switches | Used to set or clear Unique switches. | <Menu>, <*>, <0>, <4> |
| T.30 Monitor | Used to print a G3 procedural summary of the fax communication. | <Menu>, <*>, <0>, <5> |
| Printer maintenance | Access this mode to determine the cause of the “Please Call Service” error message. Or, when replaced the Fuser unit or Image transfer roller, reset the counter using this mode. | <Menu>, <*>, <0>, <6> |
| Monitor Speaker | Use to hear the signal sound with machine’s speaker during fax transaction. | <Menu>, <*>, <0>, <8> |
| Test Modes | Allows the technician to perform a series of diagnostic tests. | <Menu>, <*>, <0>, <9> |
| Print Machine Parameters, Memory Switches and Unique Switches List | Prints a list of the machine switch settings showing the default settings and current settings. | <Menu>, <*>, <1>, <0> |
| Line Test | Allows the technician to perform a series of diagnostic tests. | <Menu>, <*>, <1>, <1> |
| Telephone Circuit Test Modes | Allows the technician to perform a series of diagnostic tests. | <Menu>, <*>, <1>, <2> |
| Mirror Carriage Transfer Mode | Perform it before installing the fax machine. | <Menu>, <*>, <1>, <4> |
| Set or clear the consumable order sheet | Used to set or clear the consumable order sheet. | <Menu>, <*>, <1>, <5> |
| DRAM Clear | Used to clear a DRAM. | <Menu>, <*>, <1>, <6> |
| Clear Life Monitor | Used to clear a Life monitor keeps a count of the pages scanned, etc. | <Menu>, <*>, <1>, <7> |
| Clear option module’s SRAM | Used to clear a SRAM of option module. | <Menu>, <*>, <1>. <8> |
| Set Service Code | Used to protect to clear a Life monitor. | <Menu>, <*>, <1>, <9> |
| Sensor Input test | Sensor diagnostic test. | <Menu>, <*>, <2>, <2> |
| Printer diagnostic mode | Printer diagnostic test. | <Menu>, <*>, <2>, <3> |
| Network service mode | Used to display the server sumcheck or to initialize the network settings, when an optional network board has been installed. | <Menu>, <*>, <2>, <4> |
| Flash ROM Sum check | Used to confirm flash ROM Check Sum after the software is overwritten. | <Menu>, <*>, <2>, <9> |
| Printer registration adjustment | Used to adjust the printer registration. | <Menu>, <*>, <4>, <3> |
| Update the software | Used to upgrade the software using the USB RomWrite application. | <Menu>, <*>, <9>, <8> |
| Quick installation mode | You can set the initial setting mode and consumable order sheet setting continuously. | <Menu>, <*>, <9>, <9> |