Konica-Minolta bizhub 165

Starting procedure

1. Press the Menu/Select key.
2. Press the following keys in this order. [Menu Select], [Clear/Stop], [0], [0], [Clear/Stop], [0], [1]
3. The SERVICE MODE menu screen will appear.

Exiting procedure

• Press the Reset key to display the initial screen.

Changing the setting value in SERVICE MODE functions

1. Select the desired item using [▲/▼/◄/►] key.
2. Select the setting value using [▲/▼/◄/►] key.
3. Validate the selection by pressing the Menu/Select key.
4. To go back to previous screen, press the Back key.

SERVICE MODE
SERVICE'S CHOICE	SHIPMENT
	POWER SUPPLY
	MAINTENANCE COUNT.
	IU LIFT STOP MODE
	ID ADJUST
	VG ADJUST
	TRANSFER (PLAIN)
	TRANSFER (RECYCLE)
	TRANSFER (CARD1)
	TRANSFER (CARD2)
	FUSER TEMP. (PLAIN)
	FUSER TEMP. (CARD1)
	FUSER TEMP. (CARD2)
	LEADING EDGE
	TRAILING EDGE
	VERTICAL EDGE
	LOOP Ad. (TRAY1)
	LOOP Ad. (BYPASS)
	FLS PAPER SIZE
	GDI TIMEOUT
	ERASER INSTALL
	SUCTION FAN
	LANGUAGE GROUP
ADJUST	PRN MAIN (TRAY1)
	PRN MAIN (BYPASS)
	PRN SUB (TRAY1-P)
	PRN SUB (TRAY1-R)
	PRN SUB (TRAY1-C1)
	PRN SUB (TRAY1-C2)
	PRN SUB (BYPASS-P)
	PRN SUB (BYPASS-R)
	PRN SUB (BYPASS-C1)
	PRN SUB (BYPASS-C2)
	CIS MAIN ZOOM
	CIS SUB ZOOM
	CIS MAIN REGIST
	CIS SUB REGIST
	TCR GAIN
	MODEL SETTING
COUNTER	TOTAL COUNTER
	SIZE COUNTER
	PM COUNTER
	MAINTENANCE COUNT.
	SUPPLIES COUNTER
	APPLICATION COUNT.
	SCAN COUNTER
	PAPER SIZE COUNTER
	MISFEED COUNTER
	TROUBLE COUNTER
DISPLAY	TONER DENSITY
	FUSER TEMPERATURE
	TRANSCRIPT CURRENT
	TCR GAIN
	PROCESS CONTROL
	MAIN F/W VER.
	ENGINE F/W VER.
	MAIN RAM SIZE
	SERIAL NO.
	CUSTOMER ID
FUNCTION	PAPER FEED TEST
	PROCESS CHECK
	TCR AUTO ADJUST
	PRN TEST PATTERN
	SCAN TEST
	TONER SUPPLY
REPORT *1	SETTING DATA LIST
FIXED ZOOM CHANGE
FACTORY TEST	PANEL TEST
	RAM TEST
CLEAR DATA	MEMORY CLEAR
	TOTAL CLEAR
	PM COUNTER
	MAINTENANCE COUNT.
	SUPPLIES COUNTER
	APPLICATION COUNT.
	SCAN COUNTER
	PAPER SIZE COUNTER
	MISFEED COUNTER
	TROUBLE COUNTER