Konica-Minolta bizhub 160f
Troubleshooting. Power is not turned ON
Relevant Electrical Parts
Controller/Mechanical Control Board (PWB-P)
Power Unit (PU1)
Troubleshooting Procedures
Step | Check | Result | Action |
---|---|---|---|
1 | Is the power cord plugged into the power outlet? | NO | Plug the power cord into the power outlet. |
2 | Is the power cord connected properly to the printer? | NO | Plug the power cord into the printer. |
3 | Is the Power Switch turned ON? | NO | Turn ON the Power Switch. |
4 | Are the fuses (F101 and F102) on the Power Unit conducting? | NO | Replace Power Unit (PU1). |
YES | Replace Controller/Mechanical Control Board (PWB-P). |