Konica-Minolta bizhub 160f
Troubleshooting. Jam. 3. Fusing/Exit Misfeed
Detection Timing
| Type | Description |
|---|---|
| Fuser Jam | The Exit Sensor is not unblocked after the predetermined period of time has elapsed after the Paper Take-Up Switch is turned on. |
| Remains paper Jam 1 | If all of the following conditions are met • The Front Door or Exit Cover is opened, then closed. (Or the machine is turned on.) • The Paper Take-Up Switch is turned on or the Exit Sensor is blocked. |
| Remains paper Jam 2 | |
| Paper exit jam | The Exit Sensor is unblocked slower than the predetermined period of time after the Paper Take-Up Switch is turned on. |
Relevant Electrical Parts
Paper Take-Up Switch (S1)
Exit Sensor (PS1)
Controller/Mechanical Control Board (PWB-P)
Troubleshooting Procedures
| Step | Action | Control Signal | Location |
|---|---|---|---|
| 1 | Initial check items | ||
| 2 | S1 switch check | PWB-P MPJ10P-2 | F-7 |
| 3 | PS1 sensor check | PWB-P MPJ8P-3 | |
| 4 | Replace PWB-P. |