Konica-Minolta bizhub 160f
Troubleshooting. Jam. 2. Paper Take-Up/Transport Misfeed
Detection Timing
| Type | Description |
|---|---|
| MP tray Pick-up Jam | The Paper Take-Up Switch does not turn on after the predetermined period of time has elapsed after paper take-up began. |
| 2nd tray Pick-up Jam | |
| Bypass tray Pick-up Jam | |
| Separator Jam | The Exit Sensor is not blocked after the predetermined period of time has elapsed after the Paper Take-Up Switch is turned on. The Paper Take-Up Switch is not turned off after the predetermined period of time has elapsed after the Paper Take-Up Switch is turned on. |
Relevant Electrical Parts
Paper Take-Up Switch (S1)
Exit Sensor (PS1)
Paper Take-Up Solenoid (SL1)
Controller/Mechanical Control Board (PWB-P)
Troubleshooting Procedures
| Step | Action | Control Signal | Location |
|---|---|---|---|
| 1 | Initial checks | ||
| 2 | SL1 solenoid check | PWB-P MPJ3P-2 | B-7 |
| 3 | S1 switch check | PWB-P MPJ10P-2 | F-7 |
| 4 | PS1 sensor check | PWB-P MPJ8P-3 | B-7 |
| 5 | Replace PWB-P. |