Konica-Minolta bizhub 1600f
Service Mode. OTHER FUNCTIONS
Before you start, position the Soft-switch 1 bit N°8 to 1.
- Printing all parameters (including installation and technical parameters):
▼ [*] [1] - Switching to forced standby mode regardless of the clock:
▼ [*] [2] - Switching to software download via a phone line:
▼ [*] [3] - Switching to software download via a computer link :
▼ [*] [4] - Save the directory and parameters on I2C card:
▼ [*] [5] - Save the directory and parameters via STN:
▼ [*] [7] - Accept directory and parameters download via STN:
▼ [*] [8] - Restore the directory and parameters from I2C card:
▼ [*] [9] - Launching scanner tuning:
▼ [*] [A] - Displaying miniboot version:
▼ [*] [B] - Displaying the state of the applications, traffic and drivers:
▼ [*] [E] - Display PCL/SG Script fonts checksum:
▼ [*] [F] - Retransmission of faxes to print to rerouting mail:
▼ [*] [G] - Tuning the eco-toner (reserved for tests):
▼ [*] [H] - Activating the RAM dump:
▼ [*] [K] - Display modem software version:
▼ [*] [M] - Entering the serial number (with the SOS 1 bit 8 at 1, identical to▼ * R):
▼ [*] [N] - Displaying the internal counters:
▼ [*] [O] - Displaying the GDI throughput:
▼ [*] [P] - Rebooting the machine manually (with the SOS 1 bit 8 at 1):
▼ [*] [R] - Displaying main software version, checksum and device serial number:
▼ [*] [V] - Displaying the version of the principal software and the checksum:
▼ [*] [W] - Printing internal counters:
▼ [*] [Y] - Tuning the level of PDL symbols:
▼ [*] [Z]