HP LaserJet Pro M706
Service Mode. Printer resets
NVRAM initialization
CAUTION:
Be sure to print a configuration page before performing an NVRAM initialization.
An NVRAM initialization erases all data stored in the unprotected NVRAM sections. Performing an NVRAM initialization resets the following settings and information:
- All menu settings are reset to factory default values.
- All localization settings, including language and country/region, are reset.
After performing an NVRAM initialization, reconfigure any computers that print to this product so that the computers can recognize the product.
- Turn the product off.
- Press and hold the right-arrow button. Keep the right-arrow button depressed as you turn the product on.
- When the Permanent Storage Init. message appears on the display, release the buttons.
- When the product has finished the NVRAM initialization, it returns to the Ready state.
Super NVRAM initialization
A super NVRAM initialization restores the product to the “generic product mode” in which it arrived from the factory. This means that you will have to reset the language and country/region settings when the product starts after the initialization. A super NVRAM initialization erases all data stored in the protected and unprotected NVRAM sections.
- Turn the product off.
- Press and hold the left-arrow button. Keep the left-arrow button depressed as you turn the product on.
- When the Permanent Storage Init. message appears on the display, release the buttons.
- When the super NVRAM initialization has been completed, the product enters the generic product mode.