HP LaserJet Pro M203dn
Control Panel Error Messages (M227, M230 models). Messeges 4
Jam in output bin. Open rear door and clear jam.
Description
A paper jam occurred in the output bin area of the printer.
Recommended action
- Follow the instructions on the control panel to clear the jammed media.
- If the issue persists:
a. Use paper that meets HP specifications. Store paper unopened in its original packaging.
b. Use the product in an area that meets the environmental specifications for this product.
Jam in Tray 1. Clear jam and then press [OK].
Description
A paper jam occurred while printing from the Tray 1 slot.
Recommended action
- Follow the instructions on the control panel to clear the jammed media.
- If the issue persists:
a. Adjust the side paper guides in the tray 1 slot. Allow the printer to pull the media in when inserted in the Tray 1 slot.
b. Use paper that meets HP specifications. Store paper unopened in its original packaging.
c. Use the product in an area that meets the environmental specifications for this product. - If the issue persists, check the pick-up rollers for wear or damage and replace if necessary.
Load paper.
Description
The tray is empty.
Recommended action
Load paper in the tray.
Load tray 1 <TYPE>, <SIZE>. Press [OK] to continue.
Description
The tray is not configured for the paper type and size that the print job is requesting.
Recommended action
Load the correct paper into Tray 1 and press OK to continue printing.
Load tray 1. Plain, <SIZE> / Cleaning mode. Press [OK] to start.
Description
The product is ready to process the cleaning operation.
Recommended action
Load Tray 1 with plain paper in the size indicated, and then press the OK button.
Load tray 1. Press [OK] to continue.
Description
The tray is empty.
Recommended action
Load paper into the tray and press OK to continue printing.
Load tray <X> Press [OK] for available media.
Description
The tray is empty.
Recommended action
Load paper into the tray to continue printing. Press the OK button to select a different tray.
Manual Duplex. Load Tray <#>. Press [OK] to continue.
Description
The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
Recommended action
Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you, and then press the OK button.