HP LaserJet M706 Pro

NVRAM initialization

CAUTION:
Be sure to print a configuration page before performing an NVRAM initialization.

An NVRAM initialization erases all data stored in the unprotected NVRAM sections. Performing an NVRAM initialization resets the following settings and information:

• All menu settings are reset to factory default values.
• All localization settings, including language and country/region, are reset.

After performing an NVRAM initialization, reconfigure any computers that print to this product so that the computers can recognize the product.

1. Turn the product off.
2. Press and hold the right-arrow button. Keep the right-arrow button depressed as you turn the product on.
3. When the Permanent Storage Init. message appears on the display, release the buttons.
4. When the product has finished the NVRAM initialization, it returns to the Ready state.

Super NVRAM initialization

A super NVRAM initialization restores the product to the “generic product mode” in which it arrived from the factory. This means that you will have to reset the language and country/region settings when the product starts after the initialization. A super NVRAM initialization erases all data stored in the protected and unprotected NVRAM sections.

1. Turn the product off.
2. Press and hold the left-arrow button. Keep the left-arrow button depressed as you turn the product on.
3. When the Permanent Storage Init. message appears on the display, release the buttons.
4. When the super NVRAM initialization has been completed, the product enters the generic product mode.