PrintCopy.info service

HP Color LaserJetFlow MFP E57540

Firmware upgrades

Determine the installed revision of firmware

NOTE: Print a configuration page to determine the installed revision of fi rmware.

Print the configuration page from a touchscreen control panel

  1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
  2. Open the following menus:
    • Reports
    • Configuration/Status Pages
  3. Touch Configuration Page to select it.
  4. Touch the Print button to print the pages.

Print the configuration page from a LCD control panel

  1. From the Home screen on the printer control panel, use the down arrow button to scroll to Administration, and then press the OK button.
  2. Open the following menus:
    • Reports
    • Configuration/Status Pages
  3. Use the down arrow button to scroll to Configuration Page, and then press the OK button to select it.
  4. Use the up arrow button to scroll to Print, and then press the OK button to print the pages.

USB flash drive (Pre-boot menu)

IMPORTANT:
Only use this method of performing a firmware upgrade if the printer cannot initialize to the Ready state.

  1. Copy the .bdl file to a portable USB flash drive.
  2. Touch the HP logo in the middle of the control-panel display when you see the 1/8 under the logo.
  3. Touch the down arrow button to highlight +3 Administrator, and then touch the OK button.
  4. If necessary, touch the down arrow button to highlight +1 Download, and then touch the OK button.
  5. Insert the USB flash drive with the .bdl file on it.
    NOTE: If the error message No USB Thumbdrive Files Found displays on the control-panel display, try using a different portable storage device.
  6. Touch the down arrow button to highlight USB Thumbdrive, and then touch the OK button.
  7. Touch the down arrow button to highlight the .bdl file, and then touch the OK button.
    NOTE: The upgrade process can take 10 minutes or longer to complete.
    TIP: If there is more than one .bdl file on the storage device, make sure to select the correct file for this printer.
  8. When the message Complete displays on the control-panel display, touch the button several times until the message Continue displays.
  9. Touch the OK button to begin the upgrade. When the upgrade is complete, the printer will initialize to the Ready state.
  10. When the upgrade process is complete, print a configuration page and verify that the upgrade firmware version was installed.

USB flash drive firmware (Pre-boot menu) update from a LCD control panel

  1. Press the Cancel button when you see the 1/8 under the logo.
  2. Press the down arrow ▼ button to highlight +3 Administrator, and then press the OK button.
  3. If necessary, press the down arrow ▼ button to highlight +1 Download, and then press the OK button.
  4. Insert the USB flash drive with the .bdl file on it.
    NOTE: If the error message No USB Thumbdrive Files Found displays on the control-panel display, try using a different portable storage device.
  5. Press the down arrow button to highlight USB Thumbdrive, and then press the OK button.
  6. Press the down arrow button to highlight the .bdl file, and then press the OK button.
    NOTE: The upgrade process can take 10 minutes or longer to complete.
    TIP: If there is more than one .bdl file on the storage device, make sure to select the correct file for this printer.
  7. When the message Complete displays on the control-panel display, press the button several times until the message Continue displays.
  8. Touch the OK button to begin the upgrade. When the upgrade is complete, the printer will initialize to the Ready state.
  9. When the upgrade process is complete, print a configuration page and verify that the upgrade firmware version was installed.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us