Epson WorkForce WF7018

Occurrence Condition

This error occurs when the top of paper cannot be detected by PE Sensor within the specified steps even if the paper has been fed correctly. (No paper / paper loading failed / paper is fed at slant)

Major Occurrence Timing

• Paper loading timing

Major Troubleshooting

1. Put papers in Cassette Assy and press the “OK” button.
2. If a paper stops before reaching PE Sensor, remove it and check the paper condition.
3. A) If no damage in the above 2, set edge guide correctly after putting papers in Cassette Assy and retry.
   B) If damage in the above 2, check foreign materials / parts come-off / parts
4. If the problem is not solved by 3-A & 3-B, check the following.
   • Foreign material
   • Part come-off
   • Surface condition of Pickup Roller or paper feed roller in Duplex Unit
   • PE Sensor Lever
   • PE Sensor
   • Pre-PE Sensor Lever
   • Pre-PE Sensor
   • Main Board
   • PF Motor or Pickup Motor
   • Cassette Assy
   • Paper Stopper Assy