Epson WorkForce WF2512

Error is indicated during printing nozzle check pattern.

Occurrence Condition

This error occurs when top of paper can not be detected correctly by PE Sensor in the specified steps up to completion of the paper loading operation. (No paper / No loading / large paper skew)

Major Occurrence Timing

• Paper loading timing

Major Troubleshooting

1. Set paper in ASF and perform paper feed operation.
2. If the paper stops before reaching PE Sensor, remove it and check the paper condition.
3. A)If paper is OK, set paper in ASF and move edge guides to appropriate position, and perform 2 again.
   B)If damage in the above 2, check foreign materials / parts come-off / parts transformation in paper path.
4. If the problem is not solved by 3-A) & 3-B), check the following.
   • Foreign object
   • Detached parts
   • Surface condition of LD Roller or PF Roller
   • PE Sensor Lever
   • PE Sensor
   • Main Board
   • PF Motor