Epson WorkForce WF-C869R
Service mode. Menu configuration
Service Support Mode Top
Up/Down:[2][8] Shift:[4][6] Back:[*] Run:[#]
Individual Action Check: MENU
Before Repair Operation:MENU
Adjustment:MENU
Maintenance:MENU
Swap Mech Unit:MENU
CR Unlock Power Off
USB FW Update
User Log Get Mode
Up/Down:[2][8] Shift:[4][6] Back:[*] Run:[#]
Individual Action Check: MENU
Before Repair Operation:MENU
Adjustment:MENU
Maintenance:MENU
Swap Mech Unit:MENU
CR Unlock Power Off
USB FW Update
User Log Get Mode
Service Support Mode: Top Menu Screen
| Display | Item | Overview | Usage situation |
|---|---|---|---|
| Individual Action Check: MENU | Individual operation check | Allows you to check whether or not the various motors, sensors, and solenoids are operating normally. | Troubleshooting |
| Before Repair Operation: MENU | Preparation work before repair menu | Perform the supplemental work of parts for which supplemental work is required before performing repair work. | When performing repair work |
| Adjustment: MENU | Adjustment menu | Allows you to make the adjustments required when replacing parts. | When performing repair work |
| Maintenance: MENU | Maintenance menu | Perform ink filling, cleaning, and other maintenance inside the ink supply system. | When performing repair work |
| Swap Mech Unit: MENU | Swap mechanical unit | Use this to back up the data from the old machine and restore the data on the new machine when exchanging the product. | When exchanging product |
| CR Unlock PowerOff | CR unlock power off | Turn off the power of the printer in the CR unlock state. | Before troubleshooting and repair work |
| USB FW Update | Firmware update | When updating the firmware, use this to update the firmware using external storage media such as a USB memory device. | When updating firmware |
| User Log Get Mode | User log data get mode | When performing analysis, copy the user log data to external storage media such as a USB memory device connected to the main unit. | When performing troubleshooting analysis |