Epson WorkForce WF-C8690a
Service mode. Menu configuration
Service Support Mode: Top Menu Screen
Service Support Mode Top
Up/Down:[2][8] Shift:[4][6]
Back:[*] Run:[#]
Individual Action Check: MENU
Before Repair Operation:MENU
Adjustment:MENU
Maintenance:MENU
Swap Mech Unit:MENU
USB FWUpdate
CR Unlock Power Off
User Log Get Mode
Debug Log Get Mode:MENU
Counter Reset
Up/Down:[2][8] Shift:[4][6]
Back:[*] Run:[#]
Individual Action Check: MENU
Before Repair Operation:MENU
Adjustment:MENU
Maintenance:MENU
Swap Mech Unit:MENU
USB FWUpdate
CR Unlock Power Off
User Log Get Mode
Debug Log Get Mode:MENU
Counter Reset
| Display | Overview | Usage situation |
|---|---|---|
| Individual Action Check: MENU | Allows you to check whether or not the various motors, sensors, and solenoids are operating normally. | Troubleshooting |
| Before Repair Operation: MENU | Perform the supplemental work of parts for which supplemental work is required before performing repair work. | When performing repair work |
| Adjustment: MENU | Allows you to make the adjustments required when replacing parts. | When performing repair work |
| Maintenance: MENU | Perform ink filling, cleaning, and other maintenance inside the ink supply system. | When performing repair work |
| Swap Mech Unit: MENU | Use this to back up the data from the old machine and restore the data on the new machine when exchanging the product. | When exchanging product |
| USB FW Update | When updating the firmware, use this to update the firmware using external storage media such as a USB memory device. | When updating firmware |
| CR Unlock Power Off | Turn off the power of the printer in the CR unlock state. | Before troubleshooting and repair work |
| User Log Get Mode | When performing analysis, copy the user log data to external storage media such as a USB memory device connected to the main unit. | When performing troubleshooting analysis |
| Debug Log Get Mode: MENU | When performing analysis, copy the user log data to external storage media such as a USB memory device connected to the main unit. | When performing troubleshooting analysis |
| Counter Reset | When replace the parts, reset the printer counter. | When performing repair work |