Epson WorkForce WF-C5290a

FOR WF-C5790/WF-C5790A/WF-C5710/ET-8700

1. Press and hold down the power button while pressing the [#] button from the power-off state until a message appears on the panel LCD.
2. Enter ID number of Service Support Mode, and start the service support mode.
   ▪ Enter “61544” when starting service support mode.
   ▪ Operating procedure
   Number input (move in ascending order): [2] button
   Number input (move in descending order): [8] button
   Input digit shift: [6] button
   Execute: [#] button

ID number input procedure

1. Press a number input button ([2] button or [8] button) to enter a number from 1 to 9.
2. Press the input digit shift button ([6] button) to shift to the next digit.
3. Repeat the above procedure to enter the specified ID number.
4. When all of the ID number is entered, press the execute button ([#] button). A confirmation message appears.
5. Press the execute button ([#] button) to execute or press the input digit shift button ([6] button) to enter the number again.

• It is not possible to return to the previous digit after shifting digits. If you wish to correct the number of the previous digit, proceed with the steps until after Step 4. and then perform input again.
• Please note that the execute button is not enabled until at least two digits have been entered.

FOR WF-C5210/WF-C5290/WF-C5290A

1. Press and hold down the power button while pressing the [OK] button from the power-off state until a message appears on the panel LCD.
2. Enter ID number of Service Support Mode, and start the service support mode.

▪ Enter “61544” when starting service support mode.
▪ Operating procedure
Number input (move in ascending order): [▲] button
Number input (move in descending order): [▼] button
Input digit shift: [►] button
Execute: [OK] button

ID number input procedure

1. Press a number input button ([Up] button or [Down] button) to enter a number from 1 to 9.
2. Press the input digit shift button ([Right] button) to shift to the next digit.
3. Repeat the above procedure to enter the specified ID number.
4. When all of the ID number is entered, press the execute button ([#] button). A confirmation message appears.
5. Press the execute button ([OK] button) to execute or press the input digit shift button ([Right] button) to enter the number again.

• It is not possible to return to the previous digit after shifting digits. If you wish to correct the number of the previous digit, proceed with the steps until after Step 4. and then perform input again.
• Please note that the execute button is not enabled until at least two digits have been entered.

Solution if enter and execute the wrong ID

• When a different mode starts: If you enter the wrong ID and a different mode starts, there is the possibility of changing important settings of the unit, so press the power button to turn off the power immediately and then perform the process again to enter the correct ID number.
• When non-existent ID number: The following panel LCD display appears and the power is turned off automatically.