Epson SureColor T7280
Troubleshooting. Overview
This section explains the basic procedure for troubleshooting problems on the printer quickly and efficiently. When carrying out the troubleshooting procedures, take a flexible measure following your sales company's policy and considering the troubling situation.
Preliminary Check
Make sure to verify or perform the following basic items whenever servicing the printer.
Before performing troubleshooting
Before troubleshooting, perform basic checks such as connection check of the power cable and installation check of the ink cartridges.
Check for the usage environment
Check the user's usage environment.
- Temperature/humidity of the installation site
- Drivers/RIP that the user uses
- Genuine media or 3rd party's media?
- Genuine ink or 3rd party's ink?
- F/W version (the latest?)
- Check also the following if necessary.
Phenomenon | Check Item |
---|---|
Bad print quality | The installation site inclined? |
Any vibrating equipment near the site? | |
The user's panel settings | |
Is the interior dirty? Clean it if dirty. |
|
Missing dots/bad print quality | Near a conditioner's ventilation duct? |
Recurrence check of the trouble
Check if the trouble the user claims recurs with the returned printer.
- If RIP was used, check if the trouble recurs when the driver is used.
- If 3rd party's media were used, check if the trouble recurs when a genuine medium is used.
- If 3rd party's ink was used, perform the repair according to the policy of each local sales subsidiary.
- If the F/W was not the latest, gain agreement with the user on the update of F/ W, and check if the trouble recurs when the latest F/W is used.
Check for the counter values/history
Download NVRAM and check the following with NVRAM Viewer.
- Counter history of the periodic replacement parts. (if any part's life is near.)
- Printer's operating history (if any cause for the trouble exists)
- Error history (the frequency/history of errors related with the trouble)
Test print check
For the trouble related with print quality, carry out “Test Print” and check the current adjustment status.