Epson SureColor T7200
Maintenance. Counter Reset
Whenever the parts/units which have life counter are replaced, the corresponding life counter must be reset. This is important to replace those parts/units at the correct timing.
EXECUTION MODE
Normal mode
PROCEDURE
- Turn the printer ON.
- Start the Service Program and click [FLAG CHANGE & COUNTER RESET] from the main menu.
- Choose one of the counter reset menus to be reset.
- Click [Run] to reset the counter.
- Click [Finish].
- Restart the printer.
- With NVRAM Viewer, verify that the counter has been reset to "0".
- Turn the printer OFF.
The history of the Counter Clear can be checked per counter on the NVRAM Viewer
Clear Counter Menu List
| Class | Item | Clear Menu Name |
|---|---|---|
| Main unit counter (Motor) | CR MOTOR | CR Motor Counter |
| PF MOTOR | PF Motor Counter | |
| APG Motor | APG motor counter reset | |
| ATC MOTOR (1) | ATC Motor (1) Counter Reset | |
| ATC MOTOR (2) | ATC Motor (2) Counter Reset | |
| Cutter motor | Cutter motor counter reset | |
| Main unit counter (Ink system) | PRINT HEAD | Print Head Counter |
| DAMPER KIT | Damper Kit Counter | |
| PUMP CAP UNIT | Pump Cap Unit Counter | |
| IC HOLDER | Ink Holder Counter | |
| INK TUBE | Ink tube counter | |
| Main unit counter (Board) | MAIN BOARD | Main Board Exchange Counter |
| POWER SUPPLY UNIT (PSH) | Power Supply Unit Replacement Date & Time Setting | |
| Change Flag Status | Initial Ink Charge Flag | Initial Ink Charge Flag |
| Administrator Password | Administrator Password | Administrator Password Reset |