Epson SureColor B6070

If wrong color ink is filled in an ink tank during filling ink, carry out the procedure below.

REQUIRED TOOL

• Cleaning cartridges (CL14) (2 to 4 pcs)
• New ink tanks (2 to 4 pcs)
• Maintenance boxes (2 to 4 pcs)
• New chip unit (for 2 to 4 colors. See below for which colors should be prepared.)

Check Point

Due to the structure of this printer, you cannot replace only one tank. Therefore, replacement of the tanks should be made according to the combinations below.
For SC-F6000 Series/SC-F6200 Series
• BK and M
• Y and C
For SC-B6000 Series
• BK and Y
• M and C

REMEDY

1. Turn on the printer (SC-F6200 Series only).
2. Discard the waste ink (SC-F6200 Series only).
3. Turn off the printer (SC-F6200 Series only).
4. Start the printer in the Serviceman Mode.
   Turn on the printer while pressing [Menu] + [Back] + [OK].
5. Remove the ink tank in which wrong ink was filled and the other ink tank of the corresponding color combination given below.
   Check Point
   Due to the structure of this printer, you cannot replace only one tank. Therefore, replacement of the tanks should be made according to the combinations below.
   For SC-F6000 Series
   • BK and M
   • Y and C
   For SC-B6000 Series
   • BK and Y
   • M and C
6. Lower the Side Cover.
7. Start the service program and select Resolution of mixing ink error from ADJUSTMENT (Sequence).
8. Select Ink Eject. Select the corresponding color rows, and press the [Run] button to carry out the ink eject.
9. Select Activation of Cleaning Cartridge. Select the corresponding color rows, and press the [Run] button to validate the cleaning cartridge.
10. Turn off the printer.
11. Install the cleaning cartridges.
12. Lower the Side Cover.
13. Turn on the printer.
14. Discard the waste ink (SC-F6200 Series only).
15. Select Tube inner cleaning.
    Select the corresponding color rows, and press the [Run] button to fill the cleaning liquid.
16. Discard the waste ink (SC-F6200 Series only).
17. When performing cleaning for the other rows continuously, replace the maintenance box in the home side with a new one (SC-F6000 Series/SC-B6000 Series).
18. Remove the cleaning cartridges.
19. Lower the Side Cover.
20. Turn off the printer.
21. Start the printer in the Serviceman Mode.
    Turn on the printer while pressing [Menu] + [Back] + [OK].
22. Replace the maintenance box at the home side with a new one (SC-F6000 Series/ SC-B6000 Series).
23. Select Ink Eject.
    Select the corresponding color rows, and press the [Run] button to eject the cleaning liquid.
24. Select Switch between Ink cartridges and Ink tanks.
    Select the corresponding color rows and Ink tank, and press the [Run] button to validate the ink tanks.
25. Turn off the printer.
26. Install the new ink tanks.
27. Replace the maintenance box at the home side with a new one.
28. Install the chip units, and then pour ink into the ink tanks.
29. Lower the Side Cover.
30. Turn on the printer.
31. Select Initial ink charge.
    Select the corresponding color rows, and press the [Run] button to perform the initial ink charge.
32. Select Nozzle Check.
    Select Nozzle Check Pattern Print, and press the [Run] button to perform the nozzle check.
33. Perform cleaning if necessary.
34. Select Time stamp of the resolution date (Mixing ink error). Click [Run] button.