-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Epson Stylus T1110
Troubleshooting. Ink Low, Ink Out Error
Troubleshooting of Ink Low
Occurrence Timing |
Phenomenon Detail |
Faulty Part/ Part Name |
Check Point |
Remedy |
At operation or during printing |
A message is displayed on the LED and STM3 during printing. |
Ink Cartridge |
1. Look at the remaining ink indication of the STM3 to check the amount of the ink remaining in the Ink Cartridge. |
1. Prepare a new Ink Cartridge. |
Troubleshooting of Ink Out Error
Occurrence Timing |
Phenomenon Detail |
Faulty Part/ Part Name |
Check Point |
Remedy |
During printing |
After the Carriage has detected the HP, an error is displayed on the LED and STM3. |
Ink Cartridge |
1. Look at the remaining ink indication of the STM3 to check whether the ink remains in the Ink Cartridge. |
1. Replace the Ink Cartridge with a new one. |
Troubleshooting of No Ink Cartridge/CSIC Error
Occurrence Timing |
Phenomenon Detail |
Faulty Part/ Part Name |
Check Point |
Remedy |
At power-on |
After the Carriage has detected the HP, an error is displayed on the LED and STM3. |
Ink Cartridge |
1. Check that the Ink Cartridge is installed correctly. |
1. Install the Ink Cartridge correctly. |
2. Check that the tab of the Ink Cartridge is not broken. |
2. Replace the Ink Cartridge with a new one. |
3. Check that the Memory Chip is not disconnected or not damaged. |
3. Replace the Ink Cartridge with a new one. |
After the Carriage has detected the HP, an error is displayed on the LED and STM3. |
CSIC FFC |
1. Check that the CSIC FFC is connected to the CSIC Board connector and Main Board connector CN22. |
1. Connect the CSIC FFC to the CSIC Board connector and Main Board connector CN22. |
CSIC Board |
1. Check the CSIC Board for damage. |
1. Replace the CSIC Assy with a new one. |