Epson ME Office 80W
Troubleshooting. Check point for Fatal error 1
Troubleshooting by Error Message
Occurrence timing CR position
• Power on
• Anywhere
| Detailed phenomenon | Defective unit/part name |
Check point | Remedy |
|---|---|---|---|
| When turning on the power, the CR Motor does not operate at all. | CR Motor | 1. Check if the CR Motor Connector Cable is connected to CN13 on the Main Board.
 |
1. Connect the CR Motor Connector Cable to CN13 on the Main Board. |
| 2. Check if the CR Motor Connector Cable is not damaged. | 2. Replace the CR Motor with a new one. | ||
| 3. Check if the CR Motor operates. | 3. Replace the CR Motor with a new one. | ||
| When turning on the power, the PF Motor does not operate at all | PF Motor | 1. Check if the PF Motor Connector Cable is connected to CN14 on the Main Board.
 |
1. Connect the PF Motor Connector Cable to CN14 on the Main Board. |
| 2. Check if the PF Motor Connector Cable is not damaged. | 2. Replace the PF Motor with a new one. | ||
| 3. Check if the PF Motor operates. | 3. Replace the PF Motor with a new one. |