Epson ME Office 700FW
Troubleshooting. Check point for Fatal error 2
Occurrence timing CR position
• Power on
• Anywhere
| Detailed phenomenon | Defective unit/part name | Check point | Remedy |
|---|---|---|---|
| When turning on the power, the Carriage Unit collides to the Change Lever located to the front side of the printer. | PF Motor | 1. Check if the PF Motor Connector Cable is connected to CN10 on the Main Board. | 1. Connect the PF Motor Connector Cable to CN10 on the Main Board. |
| 2. Check if the PF Motor Connector Cable is not damaged. | 2. Replace the PF Motor with a new one. | ||
| 3. Check if the PF Motor operates. | 3. Replace the PF Motor with a new one. | ||
| ASF Unit | 1. Check if the Compression Spring 2.36 does not come off in the Change Lever.
 |
1. Replace the ASF Unit with a new one. | |
| The Carriage Unit collides with the Upper Paper Guide Unit when power is turned on. | Upper Paper Guide Unit | 1. Check if the Paper Guide Upper Unit is correctly assembled.
 |
1. Reassemble the Upper Paper Guide Unit to the Main Frame correctly. |