Epson B1100

Troubleshooting of Ink Low

Occurrence Timing	Phenomenon Detail	Faulty Part/ Part Name	Check Point	Remedy
At operation or during printing	A message is displayed on the LED and STM3 during printing.	Ink Cartridge	1. Look at the remaining ink indication of the STM3 to check the amount of the ink remaining in the Ink Cartridge.	1. Prepare a new Ink Cartridge.

Troubleshooting of Ink Out Error

Occurrence Timing	Phenomenon Detail	Faulty Part/ Part Name	Check Point	Remedy
During printing	After the Carriage has detected the HP, an error is displayed on the LED and STM3.	Ink Cartridge	1. Look at the remaining ink indication of the STM3 to check whether the ink remains in the Ink Cartridge.	1. Replace the Ink Cartridge with a new one.

Troubleshooting of No Ink Cartridge/CSIC Error

Occurrence Timing	Phenomenon Detail	Faulty Part/ Part Name	Check Point	Remedy
At power-on	After the Carriage has detected the HP, an error is displayed on the LED and STM3.	Ink Cartridge	1. Check that the Ink Cartridge is installed correctly.	1. Install the Ink Cartridge correctly.
			2. Check that the tab of the Ink Cartridge is not broken.	2. Replace the Ink Cartridge with a new one.
			3. Check that the Memory Chip is not disconnected or not damaged.	3. Replace the Ink Cartridge with a new one.
	After the Carriage has detected the HP, an error is displayed on the LED and STM3.	CSIC FFC	1. Check that the CSIC FFC is connected to the CSIC Board connector and Main Board connector CN22.	1. Connect the CSIC FFC to the CSIC Board connector and Main Board connector CN22.
		CSIC Board	1. Check the CSIC Board for damage.	1. Replace the CSIC Assy with a new one.