Epson B1100
Troubleshooting. Paper Out Error 2
| Occurrence Timing | Phenomenon Detail | Faulty Part/ Part Name | Check Point | Remedy |
|---|---|---|---|---|
| At operation | Paper Mismatch Error is indicated. | PE Sensor | 1. Check that the connector cable of the PE Sensor is securely connected to the PE Sensor and Relay Board connector CN2. | 1. Connect the connector cable of the PE Sensor to the PE Sensor and connector CN2 on the Relay Board correctly. |
| 2. Check that the Sensor Holder is mounted to the Mechanical frame correctly. | 2. Install the Sensor Holder correctly. | |||
| 3. Move the Detection Lever manually as when the paper passes, and check that the Detection Lever returns to the original position automatically by the Torsion Spring when released. Refer to the above photo. | 3. Replace the PE Sensor Holder Unit with a new one. | |||
| 4. Using a tester, check that the PE Sensor is normal. • Paper absent : 2.4V or more • Paper present : 0.4V or less |
4. Replace the PE Sensor Holder Unit with a new one. |