Canon imageRUNNER Advance C3325i

Press the button in the service mode menu to display the initial screen of each mode. The differences between these modes are described below.

MODELIST

In this mode, functions for referring to each item in service mode, etc. are available.

MODELIST CLASSIC

The old sevice mode list (without explanation on the "i" button) is displayed

SERVICE BROWSER

Service browser function (* The selection button is displayed only when the service browser has been enable from service mode.)

UPDATER

The function to upgrade the version using CDS

BACKUP

The function to backup the service mode setting values

RESTORE

The function to restore the service mode setting values

SITUATION

The function to search service mode in accordance with the purpose

Description of Service Mode Items

The description of the initial screen, the main items, the intermediate items and the sub items can be displayed. After selecting any item of the initial screen, main item, the intermediate item or the sub item, pressing “i” (Information Button) displays the description of the selected item (hereinafter referred to as the service mode contents).

CAUTION:
• Displayed language of the service mode contents can be selected from J/E/F/I/G/S/C/K/T.
• The service mode contents can be upgraded using SST or a USB flash drive just like other system software.

Example: COPIER > DISPLAY > VERSION screen

1. Press the [i] button.

2. The title of each sub item is displayed.

To check the details of each item, select the relevant item and press the [i] button.

3. A detailed description of the sub item (specifications and use methods, setting screen, etc.) is displayed.

Switching the Screen Display (Level 1 <->2)

By pressing <LEVEL 1> at the upper right of the screen while Level 1 screen is displayed, the screen is switched to Level 2 screen.

NOTE:
This key combination can be used to enter the Level 2 screen.
• Mode List screen > [Settings/Registration] > [2]