Canon imageRUNNER Advance C3325i
Troubleshooting. Alarm Code 00 0085 - 04 0001
| Location Code |
Alarm Code |
Description | Details |
|---|---|---|---|
| 00 | 0085 | A notice of stat | - |
| 00 | 0246 | For R&D | - |
| 00 | 0247 | For R&D | - |
| 01 | 0010 | The configuration of an option controlled by the Main Controller has been changed | A change in configuration of an option such as a change in the configuration of the Fax Board, a change in the configuration of the Voice Board, or a change in the configuration of the option HDD, which requires turning OFF and then ON the power, was detected. Detection condition/timing: At the time of startup only Remedy: Turn OFF and then ON the main power. |
| 01 | 0020 | The configuration of an option controlled by the RCON has been changed | Due to a change in the configuration related to the scanner, a change in the hardware configuration which requires turning OFF and then ON the power was detected. Detection condition/timing: At the time of startup only Remedy: Turn OFF and then ON the main power. |
| 01 | 0030 | The configuration of an option controlled by the DCON has been changed | Due to a change in the configuration related to the printer, a change in the hardware configuration which requires turning OFF and then ON the power was detected. Detection condition/timing: At the time of startup only Remedy: Turn OFF and then ON the main power. |
| 02 | 0025 | Insufficient Scanner Unit LED light intensity alarm | In the case that the light intensity is insufficient at LED lighting. (Some of the LEDs are OFF. Scanning can be continued.) |
| 04 | 0001 | Cassette 1 Lifter error | Cause: Error in the Lifter Motor or the Lifter Sensor. Measures: 1. While the Cassette 1 is removed, turn ON the power and then insert the Cassette 1, and check the operation sound of the motor. When there is operation sound of the motor, check if the Middle Plate has been lifted up. When the Middle Plate has been lifted up: 1-1. Check that the Cassette 1 Lifter Sensor has been properly installed. 1-2. Check the harness/connector between the DC Controller and the Cassette 1 Lifter Sensor. 1-3. Check the Cassette 1 Lifter Sensor. 1-4. Replace the DC Controller PCB. When the Middle Plate has not been lifted up: 2-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear). 2-2. Check the Cassette 1 Lifter Motor. 2-3. Replace the DC Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the DC Controller and the Cassette 1 Lifter Motor. 3-2. Check conduction of the fuse in the DC Controller. 3-3. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear). 3-4. Check the Cassette 1 Lifter Motor. 3-5. Replace the DC Controller. |