Canon imageRUNNER Advance C2230i
Troubleshooting. Jam Code. DADF
DADF
ACC ID | Jam Code | Type | Sensor Name | Sensor ID |
---|---|---|---|---|
01 | 0001 | Delay | Registration sensor | SR1 |
01 | 0002 | Delay | Registration sensor | SR1 |
01 | 0003 | Delay | Registration sensor | SR1 |
01 | 0004 | Stationary | Registration sensor | SR1 |
01 | 0005 | Delay | Read sensor | SR2 |
01 | 0006 | Stationary | Read sensor | SR2 |
01 | 0007 | Delay | Delivery reversal sensor | SR3 |
01 | 0008 | Stationary | Delivery reversal sensor | SR3 |
01 | 0044 | Stationary | Registration sensor | SR1 |
01 | 0045 | Delay | Read sensor | SR2 |
01 | 0046 | Stationary | Read sensor | SR2 |
01 | 0047 | Delay | Delivery reversal sensor | SR3 |
01 | 0048 | Stationary | Delivery reversal sensor | SR3 |
01 | 0071 | Sequence Error *1 | - | - |
01 | 0073 | HP error | Release motor HP sensor | SR11 |
01 | 0090 | Door open | Copyboard Cover Open/Closed Sensor (front) |
SR1 |
01 | 0091 | Door open | Copyboard Cover Open/Closed Sensor (rear) |
SR3 |
01 | 0092 | Door open | Cover open/closed sensor | SR6 |
01 | 0093 | Door open | Cover open/closed sensor | SR6 |
01 | 0094 | Residual | Registration Sensor / Read Sensor / Delivery reversal sensor |
SR1/SR2/SR3 |
01 | 0095 | Pickup error | - | - |
01 | 0096 | Limited function *3 | - | - |
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply.
*2: Jam code generated to prompt a user to remove the original that remains inside the machine when an error occurs during a job and the machine enters limited functions mode. Troubleshooting using this jam code is not possible.