Canon imageRUNNER Advance C2220
Troubleshooting. Alarm Code 1
| Location Code | Alarm Code | Description | Details |
|---|---|---|---|
| 00 | 0227 | Detection of error in 24V Power Supply of reader |
Error in 24V Power Supply conducted to the reader was detected. |
| 0246 | System error | Contact the service company office | |
| 0247 | System error | Contact the service company office | |
| 04 | 0001 | Cassette 1 Lifter error | Cause: Error in Lift Motor or Lifter Sensor Measures: 1. While Cassette 1 is removed, turn ON the power and then insert Cassette 1. When there is operation sound of the motor 1-1. Check the harness/connector between the DC Controller (UN09/J13) and the Cassette 1 Lifter Sensor (PS12/PS26) 2-1. Check if the Cassette 1 Lifter Sensor (PS12/ PS26) is installed. 3-1. Extend the Sensor Flag of the Cassette 1 Lifter Sensor (PS12/PS26) by approx. 1.5 mm with Plastic Film, etc. 4-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear) 5-1. Replace the Cassette 1 Lifter Sensor (PS12/ PS26) 6-1. Replace the DC Controller PCB (UN09) When there is no operation sound of the motor 1-2. Check the harness/connector between the DC Controller (UN09/J13) and the Cassette 1 Lifter Motor (M14/M23) 2-2. Check conduction of the fuse (FU2) of the DC Controller (UN09) 3-2. Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 1 Lifter Motor (M14/ M23) 5-2. Replace the DC Controller (UN09) |
| 0010 | Jam left untouched (RDS creates) | ||
| 09 | 0010 | Drum memory tag detection error (Y) |
Unable to detect the memory tag of the Drum Unit (Y). |
| 0011 | Drum memory tag detection error (M) |
Unable to detect the memory tag of the Drum Unit (M). |
|
| 0012 | Drum memory tag detection error (C) |
Unable to detect the memory tag of the Drum Unit (C). |
|
| 0013 | Drum memory tag detection error (Bk) |
Unable to detect the memory tag of the Drum Unit (Bk). |
|
| 10 | 0001 | Toner out (Bk) | |
| 0002 | Toner out (C) | ||
| 0003 | Toner out (M) | ||
| 0004 | Toner out (Y) | ||
| 0017 | Toner (Y) prior delivery alarm | ||
| 0018 | Toner (M) prior delivery alarm | ||
| 0019 | Toner (C) prior delivery alarm | ||
| 0020 | Toner (Bk) prior delivery alarm | ||
| 0100 | Toner bottle replacement completion alarm | ||
| 11 | 0001 | Waste Toner Container full level | Movement: A message "The waste toner container is full." is displayed on the Control Panel, and the machine is stopped. Cause: The Waste Toner Counter reaches full. Measures: Clean the Waste Toner Container. |
| 0010 | Display of Waste Toner Container preparation warning |